Hawk

Hawk HPS Rear Brake Pads

HPS - High Performance Street

Superior Stopping Power

HPS - High Performance Street disc brake pads are world renowned for increasing stopping power on your street legal vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance’s HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology.

The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you’ll have a highly durable brake pad with less brake dust..

HPS Ferro-Compound Features:

Increased stopping power

High friction/torque hot or cold

Gentle on rotors

Extended pad life

Low dust

Virtually noise-free

All Hawk Performance High Performance Street brake pads provide a limited lifetime warranty, ensuring products to be free of defects from manufacturer’s workmanship and materials.

Note:

Hawk Performance burnishes its High Performance Street brake pads as a final step in the factory, but all brake pads have to be bedded-in with the rotors (new or used) that they will be used against. Properly bedding-in new brake pads results in a transfer film being generated at the pad and rotor interface to maximize brake performance.

Brake Pad Installation Procedure

1. Install brake pads properly. Be sure pads are securely positioned in the caliper.

2. Flush system with fresh brake fluid.

3. Check all hydraulic parts for excess wear and tear.

4. Check disc for proper thickness, parallelism, and lateral runout.

5. Check disc for scoring or grooves over .012”depth. If either applies, resurfacing is required.

6. If discs do not need resurfacing, then contamination from the previous brake pads must be removed. Sand discs with 130 grit sandpaper using moderate pressure. Use soap and water to clean discs’ surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid.

7. Inspect calipers for freedom of movement. Lubricate where necessary.

Burnishing Instructions

1. After installing new brake pads, make 6 to 10 stops from approximately 30-35 mph applying moderate pressure.

2. Make an additional 2 to 3 hard stops from approximately 40 to 45 mph.

3. DO NOT DRAG BRAKES!

4. Allow 15 minutes for brake system to cool down.

5. After step 4 your new pads are ready for use.

[PSLHB145F570]

Professional Installation is Recommended.

Hawk HPS Brake Pads - Rear Fits:
• 1986-1990 Acura Legend
• 1990-1993 Honda Accord Sedan - Akebono Front Caliper
• 1991-1995 Acura Legend
• 1991-1997 Honda Accord Wagon
• 1992-1994 Acura Vigor
• 1992-1996 Honda Prelude - S, without ABS
• 1992-1996 Honda Prelude - SE, SI - without ABS
• 1992-1996 Honda Prelude - V-Tec
• 1993-1997 Honda Accord Coupe
• 1994 Honda Accord Sedan
• 1995-1997 Honda Accord Sedan - 4 Cylinder
• 1995-1998 Acura TL
• 1995-1998 Honda Odyssey
• 1995-2002 Honda Accord Sedan - V6
• 1996-1998 Acura RL
• 1996-1999 Isuzu Oasis
• 1997-1999 Acura CL - 2.3L, 4 Cylinder
• 1997-1999 Acura CL - 3.0L, V6
• 1997-2001 Acura Integra - Type R
• 1997-2001 Honda Prelude
• 1998-2002 Honda Accord Coupe - 4 Cylinder
• 1998-2002 Honda Accord Coupe - V6
• 1998-2002 Honda Accord Sedan - 4 Cylinder
• 1999-2003 Acura TL
• 1999-2004 Acura RL
• 2000-2006 Honda S2000
• 2001-2003 Acura CL
• 2002-2004 Honda CR-V
• 2002-2005 Honda Civic Hatchback - SI
• 2002-2006 Acura RSX
• 2002-2006 Acura RSX-S
• 2003-2004 Honda Accord Sedan - 4 Cylinder
• 2003-2004 Honda Accord Sedan - V6
• 2003-2005 Honda Accord Coupe - 4 Cylinder
• 2003-2006 Honda Accord Coupe - V6 - EX, 6 Speed Manual Transmission
• 2003-2006 Honda Accord Coupe - V6 - LX, EX - Automatic
• 2003-2006 Honda Element
• 2004-2006 Acura TL Manual Transmission
• 2004-2006 Acura TSX
• 2005-2006 Honda CR-V
• 2006 Acura TL Automatic Transmission
• 2006 Honda Accord Hybrid
• 2006 Honda Civic Coupe
• 2006 Honda Civic Coupe - SI
• 2006 Honda Civic Sedan - DX. EX, LX
• 2007 Honda Accord EX-L 6 Speed Manual Transmission
• 2007 Honda Accord L4 EX
• 2007 Honda Accord V6 - EX, SE And LX

Fits Several Models, See Details