Hawk

Hawk HPS Rear Brake Pads

HPS - High Performance Street

Superior Stopping Power

HPS - High Performance Street disc brake pads are world renowned for increasing stopping power on your street legal vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance’s HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology.

The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you’ll have a highly durable brake pad with less brake dust..

HPS Ferro-Compound Features:

Increased stopping power

High friction/torque hot or cold

Gentle on rotors

Extended pad life

Low dust

Virtually noise-free

All Hawk Performance High Performance Street brake pads provide a limited lifetime warranty, ensuring products to be free of defects from manufacturer’s workmanship and materials.

Note:

Hawk Performance burnishes its High Performance Street brake pads as a final step in the factory, but all brake pads have to be bedded-in with the rotors (new or used) that they will be used against. Properly bedding-in new brake pads results in a transfer film being generated at the pad and rotor interface to maximize brake performance.

Brake Pad Installation Procedure

1. Install brake pads properly. Be sure pads are securely positioned in the caliper.

2. Flush system with fresh brake fluid.

3. Check all hydraulic parts for excess wear and tear.

4. Check disc for proper thickness, parallelism, and lateral runout.

5. Check disc for scoring or grooves over .012”depth. If either applies, resurfacing is required.

6. If discs do not need resurfacing, then contamination from the previous brake pads must be removed. Sand discs with 130 grit sandpaper using moderate pressure. Use soap and water to clean discs’ surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid.

7. Inspect calipers for freedom of movement. Lubricate where necessary.

Burnishing Instructions

1. After installing new brake pads, make 6 to 10 stops from approximately 30-35 mph applying moderate pressure.

2. Make an additional 2 to 3 hard stops from approximately 40 to 45 mph.

3. DO NOT DRAG BRAKES!

4. Allow 15 minutes for brake system to cool down.

5. After step 4 your new pads are ready for use.

[PSLHB367F585]

Professional Installation is Recommended.

Hawk HPS Brake Pads - Rear Fits:
• 1990-1995 Subaru Legacy Sedan - Except 4WD Turbo
• 1990-1995 Subaru Legacy Wagon - Except 4WD Turbo
• 1990-1999 Mitsubishi 3000GT, GT-Sl - Except GT-VR4
• 1991-1996 Dodge Stealth - 2WD
• 1992-1994 Dodge Colt Vista
• 1992-1996 Mitsubishi Diamante - Sedan
• 1992-1996 Subaru Impreza Coupe & Sedan - Except WRX
• 1992-1996 Subaru Impreza Wagon - Except Impreza Outback & WRX
• 1992-1997 Subaru SVX
• 1993-1997 Mitsubishi Galant - Except Galant Sigma V6
• 1994-1999 Mitsubishi Eclipse 2WD Turbo
• 1995-1996 Subaru Impreza Outback
• 1995-1999 Mitsubishi Eclipse - Except Turbo
• 1995-1999 Mitsubishi Eclipse 4WD Turbo
• 1995-2000 Chrysler Sebring
• 1995-2000 Dodge Avenger
• 1996 Subaru Legacy Sedan - Except GT, LSI
• 1996 Subaru Legacy Wagon - Except GT, LSI, Outback
• 1997-1999 Subaru Legacy Sedan - L
• 1997-1999 Subaru Legacy Sedan - LS, LTD, GT
• 1997-1999 Subaru Legacy Wagon - Brighton, L, LS
• 1997-1999 Subaru Legacy Wagon - GT, LSI, Outback
• 1998 Subaru Impreza Coupe & Sedan - Except WRX - RS
• 1998-2000 Mitsubishi Galant - Except Galant Sigma V6
• 2000 Mitsubishi Eclipse - Except Turbo - V6
• 2000-2005 Mitsubishi Galant - Except Galant Sigma V6 - V6
• 2001-2002 Chrysler Sebring Coupe
• 2001-2005 Dodge Stratus Coupe - 4 Cylinder
• 2001-2005 Dodge Stratus Coupe - 6 Cylinder
• 2001-2005 Mitsubishi Eclipse - Except Turbo - V6
• 2003 Chrysler Sebring Coupe - 6 Cylinder
• 2005-2006 Mitsubishi Galant
• 2006 Mitsubishi Eclipse

Fits Several Models, See Details