Hawk HP Plus Brake Pads - Front - HB119N.594
Part #:
SBC-561237
Shipping Cost:
$24.99
Shipping Info:
Usually ships in 5 days.
Listing Price:
Selling Price:
$64.99
Hawk HP Plus Brake Pads - Front - HB119N.594
Brand:
Hawk
Details:
Hawk HP Plus Front Brake Pads
HP Plus / Autocross
Hawk Performances HP Plus brake pad compound is ideal for Autocross and Track Day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads.
HP Plus utilizes a unique Ferro-Carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, Solo II and track day applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.
Extremely high coefficient of friction makes HP Plus the perfect upgrade over stock for high performance streetcars used in autocross competition or that experience repetitive, heavy braking.
Key Features:
Extremely High Friction Output
Fade Resistant
Worthy for Autocross & Club Racing Events
Warning! Due to the dramatic friction levels produced by this product to achieve "race-level" braking, rotor wear, noise, dust, and pad life may be affected.
All Hawk Performance HP Plus / Autocross brake pads provide a limited lifetime warranty, ensuring products to be free of defects from manufacturers workmanship and materials.
Note:
Hawk Performance burnishes its HP Plus brake pads as a final step in the factory, but all brake pads have to be bedded-in with the rotors (new or used) that they will be used against. Properly bedding-in new brake pads results in a transfer film being generated at the pad and rotor interface to maximize brake performance.
Brake Pad Installation Procedure
1. Install brake pads properly. Be sure pads are securely positioned in the caliper.
2. Flush system with fresh brake fluid.
3. Check all hydraulic parts for excess wear and tear.
4. Check disc for proper thickness, parallelism, and lateral runout.
5. Check disc for scoring or grooves over .012depth. If either applies, resurfacing is required.
6. If discs do not need resurfacing, then contamination from the previous brake pads must be removed. Sand discs with 130 grit sandpaper using moderate pressure. Use soap and water to clean discs surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid.
7. Inspect calipers for freedom of movement. Lubricate where necessary.
Burnishing Instructions
1. After installing new brake pads, make 6 to 10 stops from approximately 30-35 mph applying moderate pressure.
2. Make an additional 2 to 3 hard stops from approximately 40 to 45 mph.
3. DO NOT DRAG BRAKES!
4. Allow 15 minutes for brake system to cool down.
5. After step 4 your new pads are ready for use.
[PSLHB119N594]
HP Plus / Autocross
Hawk Performances HP Plus brake pad compound is ideal for Autocross and Track Day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads.
HP Plus utilizes a unique Ferro-Carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, Solo II and track day applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.
Extremely high coefficient of friction makes HP Plus the perfect upgrade over stock for high performance streetcars used in autocross competition or that experience repetitive, heavy braking.
Key Features:
Extremely High Friction Output
Fade Resistant
Worthy for Autocross & Club Racing Events
Warning! Due to the dramatic friction levels produced by this product to achieve "race-level" braking, rotor wear, noise, dust, and pad life may be affected.
All Hawk Performance HP Plus / Autocross brake pads provide a limited lifetime warranty, ensuring products to be free of defects from manufacturers workmanship and materials.
Note:
Hawk Performance burnishes its HP Plus brake pads as a final step in the factory, but all brake pads have to be bedded-in with the rotors (new or used) that they will be used against. Properly bedding-in new brake pads results in a transfer film being generated at the pad and rotor interface to maximize brake performance.
Brake Pad Installation Procedure
1. Install brake pads properly. Be sure pads are securely positioned in the caliper.
2. Flush system with fresh brake fluid.
3. Check all hydraulic parts for excess wear and tear.
4. Check disc for proper thickness, parallelism, and lateral runout.
5. Check disc for scoring or grooves over .012depth. If either applies, resurfacing is required.
6. If discs do not need resurfacing, then contamination from the previous brake pads must be removed. Sand discs with 130 grit sandpaper using moderate pressure. Use soap and water to clean discs surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid.
7. Inspect calipers for freedom of movement. Lubricate where necessary.
Burnishing Instructions
1. After installing new brake pads, make 6 to 10 stops from approximately 30-35 mph applying moderate pressure.
2. Make an additional 2 to 3 hard stops from approximately 40 to 45 mph.
3. DO NOT DRAG BRAKES!
4. Allow 15 minutes for brake system to cool down.
5. After step 4 your new pads are ready for use.
[PSLHB119N594]
Installation:
Professional Installation is Recommended.
Hawk HP Plus Brake Pads - Front Fits:
1977-1985 Buick Le Sabre
1978-1981 Buick Century
1978-1983 Chevrolet Malibu
1978-1987 Buick Regal
1978-1987 Chevrolet El Camino
1978-1987 GMC Caballero
1978-1987 Oldsmobile Cutlass
1978-1988 Chevrolet Monte Carlo
1978-1988 Oldsmobile Cutlass Supreme - Except "W" Body
1978-1988 Oldsmobile F85 - Except "W" Body
1978-1988 Oldsmobile Salon - Except "W" Body
1978-1989 Oldsmobile Calais - Except "W " Body
1979-1981 Pontiac Firebird / Formula / Trans Am
1979-1985 Buick Riviera
1979-1985 Cadillac Eldorado
1979-1985 Oldsmobile Toronado / Trofeo
1980-1985 Cadillac Seville
1982-1986 Pontiac Bonneville
1982-1986 Pontiac Catalina
1982-1986 Pontiac Grand Ville
1982-1988 Chevrolet Camaro
1982-1988 Pontiac Firebird / Formula / Trans Am - Rear Disc Brakes (1st Design)
1982-1992 GMC Syclone
1982-1993 GMC Typhoon
1982-1996 GMC Jimmy Midsize SUV
1982-1997 GMC Sonoma Truck
1982-2003 Chevrolet S-10 Truck 2WD
1983-1987 Pontiac Grand Prix
1983-1997 Chevrolet S-10 (T-10) Truck 4WD
1983-1997 Chevrolet S-10 Blazer (T10) SUV 4WD - Rear Drum Brakes
1983-1997 Chevrolet S-10 Blazer SUV 2WD
1988 Pontiac Firebird / Formula / Trans Am - Rear Disc Brakes (2nd Design)
1989-1990 GMC S-15 Truck 2WD
1989-1992 Chevrolet Camaro - With Rear Disc Brakes, Except 1LE Performance Package
1989-1992 Chevrolet Camaro - With Rear Drum Brakes
1989-1992 Pontiac Firebird / Formula / Trans Am - Rear Disc Brakes / Except Performance Package / Except Turbo
1989-1992 Pontiac Firebird / Formula / Trans Am - Rear Drum Brakes
1991-1996 Oldsmobile Bravada
1996-1997 Isuzu Hombre
1997 GMC Jimmy Midsize SUV - 2WD
1997 GMC Jimmy Midsize SUV - 4WD - Rear Drum Brakes
1998-2000 Isuzu Hombre 2WD
1998-2004 GMC Sonoma Truck 2WD
Hawk HP Plus Brake Pads - Front Fits:
1977-1985 Buick Le Sabre
1978-1981 Buick Century
1978-1983 Chevrolet Malibu
1978-1987 Buick Regal
1978-1987 Chevrolet El Camino
1978-1987 GMC Caballero
1978-1987 Oldsmobile Cutlass
1978-1988 Chevrolet Monte Carlo
1978-1988 Oldsmobile Cutlass Supreme - Except "W" Body
1978-1988 Oldsmobile F85 - Except "W" Body
1978-1988 Oldsmobile Salon - Except "W" Body
1978-1989 Oldsmobile Calais - Except "W " Body
1979-1981 Pontiac Firebird / Formula / Trans Am
1979-1985 Buick Riviera
1979-1985 Cadillac Eldorado
1979-1985 Oldsmobile Toronado / Trofeo
1980-1985 Cadillac Seville
1982-1986 Pontiac Bonneville
1982-1986 Pontiac Catalina
1982-1986 Pontiac Grand Ville
1982-1988 Chevrolet Camaro
1982-1988 Pontiac Firebird / Formula / Trans Am - Rear Disc Brakes (1st Design)
1982-1992 GMC Syclone
1982-1993 GMC Typhoon
1982-1996 GMC Jimmy Midsize SUV
1982-1997 GMC Sonoma Truck
1982-2003 Chevrolet S-10 Truck 2WD
1983-1987 Pontiac Grand Prix
1983-1997 Chevrolet S-10 (T-10) Truck 4WD
1983-1997 Chevrolet S-10 Blazer (T10) SUV 4WD - Rear Drum Brakes
1983-1997 Chevrolet S-10 Blazer SUV 2WD
1988 Pontiac Firebird / Formula / Trans Am - Rear Disc Brakes (2nd Design)
1989-1990 GMC S-15 Truck 2WD
1989-1992 Chevrolet Camaro - With Rear Disc Brakes, Except 1LE Performance Package
1989-1992 Chevrolet Camaro - With Rear Drum Brakes
1989-1992 Pontiac Firebird / Formula / Trans Am - Rear Disc Brakes / Except Performance Package / Except Turbo
1989-1992 Pontiac Firebird / Formula / Trans Am - Rear Drum Brakes
1991-1996 Oldsmobile Bravada
1996-1997 Isuzu Hombre
1997 GMC Jimmy Midsize SUV - 2WD
1997 GMC Jimmy Midsize SUV - 4WD - Rear Drum Brakes
1998-2000 Isuzu Hombre 2WD
1998-2004 GMC Sonoma Truck 2WD
Highlight:
Fits Several Models, See Details







