Hawk Performance Ceramic Brake Pads - Rear - HB262Z.540
Part #:
SBC-561925
Shipping Cost:
$24.99
Shipping Info:
Usually ships in 5 days.
Listing Price:
Selling Price:
$61.99
Hawk Performance Ceramic Brake Pads - Rear - HB262Z.540
Brand:
Hawk
Details:
Hawk Performance Ceramic Rear Brake Pads
Performance Ceramic
Ultimate stopping power in an ultra-low dust, low noise ceramic compound!
Hawk Performance has introduced a premium, high performance, ultra-low dust, low noise compound called Performance Ceramic.
Performance Ceramic is engineered to reduce brake NVH (Noise, Vibration and Harshness), creating a quieter performing brake pad. Furthermore, the ceramic brake pad formula has a linear friction profile that allows your ABS brake system to work more effectively. With Performance Ceramic you can expect reduced brake pad wear, lower dust output levels and a rotor-friendly brake pad.
Performance Ceramic – quiet, clean & fast stopping!
Key Features:
Increased stopping power
Increased rotor life
Extended pad life
Ultra-low dust
Extremely quiet
Stable friction output
Recommended for import domestic automobiles, luxury SUV’s, sports trucks & vans.
Today’s alloy wheel designs on premium vehicles has contributed to customer demand for a low dust performance brake product. Specify Hawk Performance’s Performance Ceramic brake pads for your luxury car, SUV, or truck.
All Hawk Performance Performance Ceramic brake pads provide a limited lifetime warranty, ensuring products to be free of defects from manufacturer’s workmanship and materials.
Note:
Hawk Performance burnishes its Performance Ceramic brake pads as a final step in the factory, but all brake pads have to be bedded-in with the rotors (new or used) that they will be used against. Properly bedding-in new brake pads results in a transfer film being generated at the pad and rotor interface to maximize brake performance
Brake Pad Installation Procedure
1. Install brake pads properly. Be sure pads are securely positioned in the caliper.
2. Flush system with fresh brake fluid.
3. Check all hydraulic parts for excess wear and tear.
4. Check disc for proper thickness, parallelism, and lateral runout.
5. Check disc for scoring or grooves over .012”depth. If either applies, resurfacing is required.
6. If discs do not need resurfacing, then contamination from the previous brake pads must be removed. Sand discs with 130 grit sandpaper using moderate pressure. Use soap and water to clean discs’ surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid.
7. Inspect calipers for freedom of movement. Lubricate where necessary.
Burnishing Instructions
1. After installing new brake pads, make 6 to 10 stops from approximately 30-35 mph applying moderate pressure.
2. Make an additional 2 to 3 hard stops from approximately 40 to 45 mph.
3. DO NOT DRAG BRAKES!
4. Allow 15 minutes for brake system to cool down.
5. After step 4 your new pads are ready for use.
[PSLHB262Z540]
Performance Ceramic
Ultimate stopping power in an ultra-low dust, low noise ceramic compound!
Hawk Performance has introduced a premium, high performance, ultra-low dust, low noise compound called Performance Ceramic.
Performance Ceramic is engineered to reduce brake NVH (Noise, Vibration and Harshness), creating a quieter performing brake pad. Furthermore, the ceramic brake pad formula has a linear friction profile that allows your ABS brake system to work more effectively. With Performance Ceramic you can expect reduced brake pad wear, lower dust output levels and a rotor-friendly brake pad.
Performance Ceramic – quiet, clean & fast stopping!
Key Features:
Increased stopping power
Increased rotor life
Extended pad life
Ultra-low dust
Extremely quiet
Stable friction output
Recommended for import domestic automobiles, luxury SUV’s, sports trucks & vans.
Today’s alloy wheel designs on premium vehicles has contributed to customer demand for a low dust performance brake product. Specify Hawk Performance’s Performance Ceramic brake pads for your luxury car, SUV, or truck.
All Hawk Performance Performance Ceramic brake pads provide a limited lifetime warranty, ensuring products to be free of defects from manufacturer’s workmanship and materials.
Note:
Hawk Performance burnishes its Performance Ceramic brake pads as a final step in the factory, but all brake pads have to be bedded-in with the rotors (new or used) that they will be used against. Properly bedding-in new brake pads results in a transfer film being generated at the pad and rotor interface to maximize brake performance
Brake Pad Installation Procedure
1. Install brake pads properly. Be sure pads are securely positioned in the caliper.
2. Flush system with fresh brake fluid.
3. Check all hydraulic parts for excess wear and tear.
4. Check disc for proper thickness, parallelism, and lateral runout.
5. Check disc for scoring or grooves over .012”depth. If either applies, resurfacing is required.
6. If discs do not need resurfacing, then contamination from the previous brake pads must be removed. Sand discs with 130 grit sandpaper using moderate pressure. Use soap and water to clean discs’ surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid.
7. Inspect calipers for freedom of movement. Lubricate where necessary.
Burnishing Instructions
1. After installing new brake pads, make 6 to 10 stops from approximately 30-35 mph applying moderate pressure.
2. Make an additional 2 to 3 hard stops from approximately 40 to 45 mph.
3. DO NOT DRAG BRAKES!
4. Allow 15 minutes for brake system to cool down.
5. After step 4 your new pads are ready for use.
[PSLHB262Z540]
Installation:
Professional Installation is Recommended.
Hawk Performance Ceramic Brake Pads - Rear Fits:
• 1984-1989 Nissan 300ZX - Except Turbo
• 1985-1989 Nissan Maxima
• 1987-1988 Nissan 200SX - 6 Cylinder
• 1989-1993 Nissan 240SX - With ABS
• 1989-1996 Nissan 240SX - without ABS
• 1992-2001 Hyundai Elantra
• 1994-1996 Nissan 240SX - With ABS
• 1996-1998 Nissan 240SX
• 1997-2001 Hyundai Tiburon
• 2002-2006 Hyundai Tiburon
Hawk Performance Ceramic Brake Pads - Rear Fits:
• 1984-1989 Nissan 300ZX - Except Turbo
• 1985-1989 Nissan Maxima
• 1987-1988 Nissan 200SX - 6 Cylinder
• 1989-1993 Nissan 240SX - With ABS
• 1989-1996 Nissan 240SX - without ABS
• 1992-2001 Hyundai Elantra
• 1994-1996 Nissan 240SX - With ABS
• 1996-1998 Nissan 240SX
• 1997-2001 Hyundai Tiburon
• 2002-2006 Hyundai Tiburon
Highlight:
Fits Several Models, See Details