MSD Ignition Systems 62152
Part #:
SBC-15729
Shipping Cost:
$14.99
Shipping Info:
This item usually ships within 5 business day.
Listing Price:
Selling Price:
$505.99
MSD Ignition Systems 62152
Brand:
MSD
Details:
Four cylinder distributorless ignition applications (with two coil packs) will benefit from the incredible spark energy of the new MSD Programmable DIS-2 Ignition Control as well as its ignition programming capabilities! MSDs CD circuits work with state-of-the-art IGBT coil drivers to deliver a spark with 190mj of spark energy! Below 3,300 rpm, there is series of multiple sparks that burns in the cylinder for 20° producing a smooth idle with great throttle response. You get to control all of this spark energy through an incredible array of timing and rpm programs. The heart of the Programmable DIS-2 is a 15Mh microprocessor that reviews, analyzes and manages every trigger signal and is capable of up to 15 million instructions per second! The end result is a powerful ignition control with endless programming capabilities to produce reliable performance.
Features
- Fully programmable:
- Individual Cylinder Timing: Maximize the performance of each cylinder to compensate for differing dynamics in airflow and other variances. The spark to each cylinder can be adjusted up to 5° in 0.1° increments which will eliminate any compromises in timing while developing the full potential of the engine.
- Launch Timing Curve: Program a separate timing curve exclusively for the launch! This is a big help in compensating for varying track conditions to maximize traction.
- Boost Timing Curve: For turbo or superchargered applications an optional MAP sensor can be installed so you can control the ignition timing in relation to boost pressure. The timing can be programmed from 0° - 25° in conjunction to for boost pressure ranging from 0 - 45 psi in 0.50 psi increments.
- Multi-Step Retard: Three separate stages of retard can be activated by either rpm or a separate activation wire. This is perfect for all nitrous applications. Programmable from 0°-15° in 0.1 degree increments within 800 - 15,000 rpm in 100 rpm steps.
- Gear RPM and Retards: Program a different rpm shift point for each gear as well as a retard for every gear change.
- Three Rev Limits: Set three different rev limits for the burnout, the holeshot and top end overrev protection in 100 rpm increments.
- Software downloadable from MSD (Pro-Data+)
- Can also be programmed via MSD 7550 handheld programmer
Installation:
Specifications
- For 4 Cylinder Engines with 2 Coil Packs
- Operating Voltage: 11-18 Volts, Negative Ground
- Current Draw: 8 Amps @ 10,000 RPM
- RPM Range: 15,000 RPM with 14 Volt Input
- Spark Duration: 20°
- Spark Energy: 190 millijoules Per Spark
- Voltage Output Max: 500 Volts Output Voltage / 50,000 with Blaster Coils