Magnum Force Stage 2 Cold Air Intake System - 54-11072
Part #:
587285
Listing Price:
Selling Price:
$433.99
Shipping Info:
Usually ships in 5 business days.
Magnum Force Stage 2 Cold Air Intake System - 54-11072
Brand:
aFe
Details:
advanced Flow engineering (aFe) Magnum Force Stage 2 Cold Air Intake System
Optional Prefilters are available in Yellow, Red, Black, and Blue
Magnum FORCE Stage 2 Cold Air Intake System
Replaces factory air box.
Replaces stock air filter.
Replaces factory intake tube.
Washable/reusable air filter.
Black textured molded tube.
Up to 50 HP Gain.
Increase ft-lbs of torque.
Improves airflow up to 75%.
Improves throttle response.
Improves acceleration.
Improves fuel efficiency.
More Air Equals More Power
For the automotive enthusiast who want all the power and torque he can get, aFe designed the top-of-the-line Magnum FORCE Stage 2 cold air intake system. Whether it is an spark-ignition gas or a compression-ignition diesel, the more air the engine receives, the more power it generates. For powered enhanced vehicles, whether equipped with turbocharger, NOS, propane, performance module; without more air, you are not getting maximum power. The Magnum FORCE Stage 2 systems provide all the air you need.
Compared to our other systems, the Magnum FORCE Stage 2 intake system replaces the entire stock air induction system to the throttle body or turbo housing. Remembering our motto Stock Sucks, we eliminate the stock air box, the stock air filter and the stock intake tract. The only thing retained is the stock electronics. We make sure that our Stage 2 system like all our intake systems works with the stock electronics.
Cold Air Equals More Power
In designing out the stock air box, we design in the largest air box that we can for each vehicle application. Even though we make it as large as possible, we are careful to use that stock mounting points. There is no need to cut or drill anything when you install our kits. We make the air box as large as possible so that we can get the largest air filter.
At first glance you probably wont notice the unique features that we design into each air box. Each of them is there for a purpose, either to make your job of installing the system easier or to improve the performance of your vehicle. Here are a few the features and benefits that distinguish aFe's Magnum FORCE Stage 2 intake systems:
16-gauge powder-coated steel Durable, OE look finish
Trim sealed or covered Seals out hot engine air
Secured PEM-nuts Easier installation
Welded and preassembled sheet metal Faster Installation
Pre-positioned opening for Stock attachments - No dangling wires, relocating hoses or tubes.
3-angle velocity stack adaptor on some applications
Powder-coated covers on some applications
As you can see, we put in a lot of effort to designing each air box to fit each vehicle. It takes us a little more time and effort but we do it to make the job of installing our systems easier.
Performance Starts With The Air Filter
Since we make our own filters, we can design our filters for each vehicle like we do with our air boxes. By designing the largest filter for the largest air box, we are able insure that the vehicle is getting the maximum amount of air regardless of the performance upgrades.
Our Magnum FORCE Stage 2 intake system uses our conical universal clamp-on filters. We make the filter taller, fatter, shorter, or oval to insure maximum airflow for the vehicle.
Here are some common characteristics of our air filters:
100% poly urethane construction Durable, resistant to high temperature and chemicals
Deep pleats Greater flow and dust holding capacity
Rounded pleat geometry Better airflow characteristics
Full or modified velocity stack Better airflow characteristics
Washable/reusable filter media Longer service life.
The Right Flow At The Right Place
Letting more air in through the filter and keeping the hot air out doesnt help much if you cant get the air to the motor smoothly and efficiently. Some intake tracts are better than others but theres always room for improvement. That is what we do with our intake tube. Our intakes systems use heat blocking molded tubes because you just cant bend a steel or aluminum tube to accommodate the modern engine compartment. With a molded tube, you can remove kinks, sharp bends and obstructions that restrict airflow. By tapering the tube, you can accelerate the airflow for more torque and better throttle response.
Whenever we design a new intake tube, the biggest challenge is the factory Mass Airflow Sensor. You just cant place the MAF sensor any place. The modern MAF sensor is sensitive to changes in air speed and volume. Slight changes can improve performance or it can trigger the Check Engine Light (CEL). We design our tube so that the factory MAF sensor is positioned in just the right place so that you get the best performance possible without triggering the CEL.
With the installation of one of our Stage 2 intake systems, youre ready for other more upgrades like exhausts and performance modules that will give you even more power.
Featuring: Increases horsepower & torque.
Maximizes airflow for better acceleration and responsiveness
Improved performance results in greater fuel efficiency
Installs in less than 60 minutes using factory mounting points
No cutting or drilling to engine compartment is required
Replaces OE air filter with high flow high performance 360 degree radial flow air filter
Washable/reusable air filter with the deepest pleats in the industry is the largest possible in the space allowed
Replaces factory air box with a heat-blocking shield that seals to the hood
Limited lifetime warranty
[AFE54-11072]
Optional Prefilters are available in Yellow, Red, Black, and Blue
Magnum FORCE Stage 2 Cold Air Intake System
More Air Equals More Power
For the automotive enthusiast who want all the power and torque he can get, aFe designed the top-of-the-line Magnum FORCE Stage 2 cold air intake system. Whether it is an spark-ignition gas or a compression-ignition diesel, the more air the engine receives, the more power it generates. For powered enhanced vehicles, whether equipped with turbocharger, NOS, propane, performance module; without more air, you are not getting maximum power. The Magnum FORCE Stage 2 systems provide all the air you need.
Compared to our other systems, the Magnum FORCE Stage 2 intake system replaces the entire stock air induction system to the throttle body or turbo housing. Remembering our motto Stock Sucks, we eliminate the stock air box, the stock air filter and the stock intake tract. The only thing retained is the stock electronics. We make sure that our Stage 2 system like all our intake systems works with the stock electronics.
Cold Air Equals More Power
In designing out the stock air box, we design in the largest air box that we can for each vehicle application. Even though we make it as large as possible, we are careful to use that stock mounting points. There is no need to cut or drill anything when you install our kits. We make the air box as large as possible so that we can get the largest air filter.
At first glance you probably wont notice the unique features that we design into each air box. Each of them is there for a purpose, either to make your job of installing the system easier or to improve the performance of your vehicle. Here are a few the features and benefits that distinguish aFe's Magnum FORCE Stage 2 intake systems:
As you can see, we put in a lot of effort to designing each air box to fit each vehicle. It takes us a little more time and effort but we do it to make the job of installing our systems easier.
Performance Starts With The Air Filter
Since we make our own filters, we can design our filters for each vehicle like we do with our air boxes. By designing the largest filter for the largest air box, we are able insure that the vehicle is getting the maximum amount of air regardless of the performance upgrades.
Our Magnum FORCE Stage 2 intake system uses our conical universal clamp-on filters. We make the filter taller, fatter, shorter, or oval to insure maximum airflow for the vehicle.
Here are some common characteristics of our air filters:
The Right Flow At The Right Place
Letting more air in through the filter and keeping the hot air out doesnt help much if you cant get the air to the motor smoothly and efficiently. Some intake tracts are better than others but theres always room for improvement. That is what we do with our intake tube. Our intakes systems use heat blocking molded tubes because you just cant bend a steel or aluminum tube to accommodate the modern engine compartment. With a molded tube, you can remove kinks, sharp bends and obstructions that restrict airflow. By tapering the tube, you can accelerate the airflow for more torque and better throttle response.
Whenever we design a new intake tube, the biggest challenge is the factory Mass Airflow Sensor. You just cant place the MAF sensor any place. The modern MAF sensor is sensitive to changes in air speed and volume. Slight changes can improve performance or it can trigger the Check Engine Light (CEL). We design our tube so that the factory MAF sensor is positioned in just the right place so that you get the best performance possible without triggering the CEL.
With the installation of one of our Stage 2 intake systems, youre ready for other more upgrades like exhausts and performance modules that will give you even more power.
Featuring:
[AFE54-11072]
Installation:
Easy to install, designed for the do-it-yourself enthusiasts. Click here for PDF Instructions
advanced Flow engineering (aFe) Magnum Force Stage 2 Cold Air Intake System Fits:
2007-2008 Cadillac Escalade GMT900 Chassis V8 6.2L Gas 2007-2008 Chevrolet Avalanche GMT900 Chassis V8 5.3L Gas 2007-2008 Chevrolet Silverado GMT900 Chassis V8 4.8L Gas 2007-2008 Chevrolet Silverado GMT900 Chassis V8 5.3L Gas 2007-2008 Chevrolet Silverado GMT900 Chassis, w/Electric Fan Only V8 6.0L Gas 2007-2008 Chevrolet Suburban GMT900 Chassis V8 5.3L Gas 2008-2008 Chevrolet Suburban GMT900 Chassis, w/ Electric Fan Only V8 6.0L Gas 2007-2008 Chevrolet Tahoe GMT900 Chassis V8 4.8L Gas 2007-2008 Chevrolet Tahoe GMT900 Chassis V8 5.3L Gas 2007-2008 GMC Sierra GMT900 Chassis V8 4.8L Gas 2007-2008 GMC Sierra GMT900 Chassis V8 5.3L Gas 2007-2008 GMC Sierra GMT900 Chassis, w/ Electric Fan Only V8 6.0L Gas 2007-2008 GMC Sierra GMT900 Chassis, Denali V8 6.2L Gas 2007-2008 GMC Yukon GMT900 Chassis V8 4.8L Gas 2007-2008 GMC Yukon GMT900 Chassis V8 5.3L Gas 2007-2008 GMC Yukon GMT900 Chassis, Denali V8 6.2L Gas 2007-2008 GMC Yukon XL GMT900 Chassis V8 5.3L Gas 2007-2008 GMC Yukon XL GMT900 Chassis, w/ Electric Fan Only V8 6.0L Gas 2007-2008 GMC Yukon XL GMT900 Chassis, Denali V8 6.2L Gas
advanced Flow engineering (aFe) Magnum Force Stage 2 Cold Air Intake System Fits:
Highlight:
Fits V8 Models
Gain up to 50 HP!
Reusable Washable Deep Filter Pleats
Optional Pre-filters Available
Gain up to 50 HP!
Reusable Washable Deep Filter Pleats
Optional Pre-filters Available