When you search for Best Jack Stands, you have to appear at a couple of things… weight capability for a pair of 2, the assortment of adjustable height, base diameter for just how much space you have, and how the adjusting mechanism functions.

Crucial factors that you consider are the sturdiness of this product and the production quality.

The foundation can be made from aluminum, but search for steel hooks or ratcheting apparatuses that will have the ability to manage years of wear without breaking or bending.

To make it simpler for you to receive the best deal for the money, here are three top-rated jack stands chosen for their general ranking and consumer satisfaction.

Be certain that you set them with a fantastic excellent floor jack to have the ability to acquire the racks beneath.

Reviews Of 13 Best Jack Stands Of 2020 - The Greatest Choice!

Reviews Of 13 Best Jack Stands Of 2020 – The Greatest Choice!

SaleBestseller No. 1
Pro-LifT T-6903D Double Pin Jack Stand - 3 Ton, 1 Pack
Sturdy stamped Steel Construction with 3 ton capacity; High quality cast ductile iron ratchet bar
Bestseller No. 2
BIG RED T43202 Torin Steel Jack Stands: 3 Ton (6,000 lb) Capacity, Red, 1 Pair
Adjustable height ranges from 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity
Bestseller No. 7
Pro-Lift T-6906D Double Pin Jack Stand - 6 Ton, 18x12 Inch (Pack of 1)
Sturdy stamped Steel Construction with 6 ton capacity; High quality cast ductile iron ratchet bar. Lifting range from 16 in. to 23-1/2 in
SaleBestseller No. 8
Powerbuilt 620471 Unijack - 6000 lb. Capacity , Black
Designed to safely Lift and hold both Regular and unibody cars and trucks; Safety bar locks the unit desired height. Height range: 11 inch to 21 inch
SaleBestseller No. 9
ESCO 10498 Jack Stand, 3 Ton Capacity, Silver
Minimum height 13.2 in.; Maximum height is 21.5 in.; Sold individually; Stand is powder coated to prevent rusting and corrosion
SaleBestseller No. 10
Omega 32225B Black Heavy Duty Jack Stand - 22 Ton Capacity
Heavy duty holding pins for adjustable heights; Large saddle securely supports load; Sturdy welded steel construction

Editor’s Pick: BIG RED Torin Steel Jack Stands 3-Ton ability

This cheap set of jack stands is quite popular on Amazon because of this. Torin is a well-known producer in this subject, and all their products are extremely large quality.

The pair we’ve selected here will support vehicles up to 3 tons (6,000 pounds ), meaning that each automobile, from compact cars, sedans, and upward to crossovers and SUVs will likely be coated.

Some heavy-duty trucks consider more — make sure to always check your owner’s manual to the weight of your automobile.

The construction of this Torin Big Red Steel Jack Stands is rock solid. They are created from high-grade forged steel and a welded frame layout, which means that you can depend on their durability.

The saddles are wider and thicker than in other jack stands, making them easier to put beneath the jacking points and safer.

In addition to this, they are readily adjustable (ratcheting style) into lots of different heights and are fast to use. There aren’t many negatives concerning these jack stands — for the cost, they deserve to be in everyone’s garage.

Pros/Rock strong construction, high-quality substances, can support Just about Any automobile, lasting, inexpensive.

Cons/Can’t encourage heavy-duty trucks.

Pro-Boost Dual Pin Jack Stands

These brutes are made from sturdy stamped steel and are rated at 6 tons of power. The performance of its cast-iron ratchet pub will be immediately recognizable to anyone who’s used a pair of jack stands, oh, the past hundred decades.

Manage a freedom snare work together to maintain the automobile off terrafirma.

A fast note about weight evaluations, a step you will see goes unmentioned on our header names. Normally, jack stands are offered in pairs and given a weight evaluation based on which both of them can encourage collectively.

This isn’t an entire scam, provided that you should always use jack stands in pairs. It might lead to confusion if you are rummaging through your previous storage and find only a single rack. To be secure, halve the power stamped on its surface.

Pros/Sturdy, the double locking mechanism

Cons/Sturdy also signifies hefty.

Bottom Line/Nearly two-foot highest height Is Quite convenient.

ESCO 10498 3-Ton Jack Stand

Having a three to power, the 10498 is a professional tier jack rack concentrating on protecting your car as you work. The top is level and includes a detachable rubber saddle pillow to decrease the danger of scratching the paint.

The exceptional design of the jack makes it ideal for vehicles that lack obvious jacking points. It retains weight without giving and will not slide out from under your vehicle.

The powder-coated base with curved base pads provides exceptional stability, making the ESCOs among the safest jack racks available on the marketplace.

Every single 12-pound rack extends from 13.2 inches to 21.5 inches, making it among the tallest-ton jack racks accessible. It works nicely for automobiles, SUVs, and lots of trucks.

Automobile enthusiasts rave over these racks, and there is a fantastic opportunity when you try them, you won’t ever need to return to the more customary jack stands.

Because ESCO sells their jack racks individually, you will need to be sure that you purchase a few. While not the least expensive jack stands on the market, they’re worth every cent.

There are a few different variations of the rack. A few consumers have inadvertently got the briefer version, so be sure that you buy them from a respectable online vendor (it is not likely you will locate them at a shop around the city ).

There also have been the occasional production flaw ranging from improperly drilled holes to faulty powder coats. These issues are infrequent and tend to get isolated, but provide a fantastic motive to inspect upon arrival.

AmazonBasics Steel Jack Stands 3-Ton ability

AmazonBasics has been expanding its product offerings, entering some distinct markets such as automotive. The organization’s jack stands are unquestionably private label products. However, they do fulfill the ASME PASE-2014 Safety Standard for Portable Automotive Service Equipment.

You may select between two – and 3-ton capability, which is parental capacity once the set of jack stands are utilized collectively.

For correcting height, these jack racks include a self-locking ratchet that is simple to use. You may get exact height adjustments with every click, so it is simple to find equally jack stands to exactly the identical height.

The durable steel frame includes rustproof coating and easy-to-read weight capability. The base of every jack rack includes a broad square-shaped foundation for optimum stability.

These jack racks are backed with a 1-year limited guarantee.

Pros/Extremely affordable, accessible two – and 3-ton capability, fulfill ASME PASE-2014 Safety Standard for Portable Automotive Service Equipment, exact height adjustments, durable steel frame.

Cons/Only a 1-year guarantee, some quality control Problems

OTC Low Profile Jack Stand

Now and then, we will throw a recommendation to our listing for the pros in our market. These jack stands may endure an astonishing twelve heaps, and because they are offered by each, that is the sum of fat for which they’re individually rated.

Theoretically, then, a quartet of those stands could consume almost a hundred million pounds. We do not suggest this.

A spun steel foundation is stated to not sink or dig into sand or asphalt. Although it’s promoted as a low profile, the smallest assortment of its height is 19 inches.

According to the list, this rack weighs just 3 pounds. If that is even close to correct, and we don’t have any reason to think it is not, this is definitely among the best weight-to-weight ratios in anybody’s toolbox.

Pros/Brutish capability, low profile design

Cons/Ungodly Pricey

Bottom Line/For the pros

Hein-Werner HW93503 3-Ton Jack Stands

If you’re trying to find a set of heavy-duty jack stands produced in the USA constructed in the United States, the Hein-Werner HW93503 is precisely what you are after.

With a rated capacity of 3 tons a set, this version is made for intermediate weights sturdy enough to manage nearly all home software.

The top center design is curved for equilibrium below the framework. The base of the stand incorporates triangular strengthening and makes it even more secure on the pavement other surfaces that have a propensity to give under stress.

Having one of the broadest bases to get a 3-ton jack rack at 7.5″ x 9″ means they are incredibly sturdy but might not match in certain tight spaces.

You will also enjoy the adjustable ratchet layout that provides a clearance range between 12 and 19 inches, which is a couple of inches higher than almost all of the contests. As you’ll pay a bit extra for Hein-Werner to build quality, most will let you know it is well worth it.

Powerbuilt Unijack 3-Ton Ability

Every other jack rack on this listing can encourage your automobile; however, not lift it. But what if you could have a jack and a jack rack in 1 product at a really low cost?

The Powerbuilt 620471 Unijack won’t just support your car or truck, but it might also lift it, making it an all-around product.

Sure, lifting capability won’t be as large as a true trolley jack, but for many users, the three 3-ton capacity will probably be just fine.

In addition to this, the Powerbuilt Unijack is a hydraulic port, meaning that small force must lift your vehicle. It may go from peaks of 11″ to 21″ — over many competitors’ offerings.

The bottom is level to decrease sinking, while the ratchet form of procuring it usually means that it is quite simple to use.

Even the purchase price of this product is quite low — it is even more affordable than a jack stand that just supports your car or truck.

With all this said, we’d advise that this”un jack” just for recreational purposes as it doesn’t seem like it is durable enough to lift a vehicle many times every day.

In other words, since there are far more parts that may fail. For changing a bicycle, however, this is among the best products on the market!

Pros/Supports and lifts the car, ratchet type Is Quite Simple to Use, quality product, really Affordable.

Cons/Not as durable as a jack for lifting the car

Performance Tool W41022

Perfect for automobiles and light-duty trucks, this particular set of jack stands have a rated capacity of 3 tons or 6,000 pounds. They’re promoted as using a heavy-duty construction with a durable and durable steel frame.

Its foundation is reported to be broad to provide stability and strength under load. It’s a classic four-foot layout, however.

These racks include a 12 inch to 17.25-inch assortment of increased height and possess a traditional-style ratcheting action due to their locks.

The rack’s footprint is roughly 7.4 inches square feet. Reviews are mostly positive, but two or three clients complain of getting products that seemed like yields.

Pros/Traditional design makes them comfortable to utilize

Cons/Hardly an Exceptional Option

Bottom Line/What you see is what you get.

Husky MPL4124 3-Ton Jack Stands

Those top-selling jack stands out of Home Depot to possess a three-ton lifting capability and heavy-duty steel foundation with anti-stick feet.

They can adjust in height from 12 to 17.5 inches. An iron saddle provides a good advantage, which makes this a fantastic selection for smaller trucks, SUVs, and cars.

For being so hardy, the Husky racks are amazingly simple to store. The launch mechanism is spring-loaded, making it a lot easier to use than a conventional lift pub.

The foundation has a special layout where thick gauge metal runs two whole side spans in the base for greater anti-sink stability.

A couple of users have noticed that the security pinhole is not always properly aligned, and a few believe that the latch is badly designed completely.

There’s also some concern within the thickness of this V-cut shirt, which could be strong enough to harm some automobiles. However, for the money, Husky products are among the better values on the market.

TONDA Steel Jack Stands 2-Ton ability

The TONDA 3 Ton Steel jack rack is a highly rated product due to a high-quality construct and a very low cost. It is made of two distinct materials — steel is used for the framework, whereas cast iron is utilized for the service arms.

There’s a rust-resistant end, which means you don’t need to worry about the jack rack’s durability. As a result of this mix, the TONDA appears like an extremely powerful product that could withstand daily abuse.

It’s ranked at 3 tons, which ought to be enough for many users, since it may be utilized on compact automobiles, SUVs, and trucks. Additionally, it is designed to satisfy the ANSI/ASME and PALD 2014 criteria.

This product consists of the ratchet kind that careers simply to use and fix, but it is not quite as secure as the pinhole kind.

Along with this, a few of the welds appear cluttered — you should not be worried about security, but they are simply not that gratifying to the eye. However, for the price this jack rack is provided, we believe it is a fantastic addition to your garage, particularly if you’re on a budget.

Pros/Strong steel frame, cast iron arm, low cost, simple to use

Cons/Some of these welds look sloppy.

Arcan Aluminum Jack Stands

There is no indication of thick or lard-like steel. These racks are promoted as ultra-lightweight, created out of”super-durable” aluminum using an extra-wide foundation for stability. Their greatest ratcheting elevation is 16.5 inches.

Just 17 ratings follow this item on Amazon, using the latest one being obsolete 2018.

If you are cool with this, understanding reviewers describe these jack racks as”well made,” “ideal for the task,” and mild enough that”my 5-year-old could pick them up and deliver them to Dad with assurance”.

Pros/Lightweight, jazzy silver color

Cons/Weaksauce 3 ton capacity

Bottom Line/Shiny bling to blind your pit box neighbors

Sunex 1410 High Height 10-Ton Jack Stands

This set of pin-type heavy-duty jack stands comes with an impressive 10-ton capability and the greatest range with this listing.

It is 28.1 in. Bottom height is greater than several stands at full expansion, and it extends all of the ways to 46.5 inches, which makes it ideal for Jeeps and raised trucks in addition to agricultural and construction surroundings.

Notice: Make certain that the 28.1 minimal height is reduced enough clearance for your motor vehicle. Sunex also makes Moderate Height and Low Height versions of the same jack rack.

The pin can be put in a vast assortment of heights, as a result of the extra gap places, and the trap itself is connected to the stand so that it will not get lost easily. A massive saddle with finding lugs help to ensure the car frame is held firmly.

This is one of these products where design things and consumers love the narrow footprint paired with metal footpads on each leg, making it sturdy without consuming additional space.

The stands’ 10-ton capacity, ll they stand up to lots of abuse and pressure, but at approximately 56 lbs per day, they are HEAVY.

Speaking of the burden, it may contribute to an issue during transport. A couple of buyers have obtained greatly damaged boxes, a few times leading to bent steel frames.

Some also have complained that the pin was dropped during transit. Make sure you buy from a respectable online seller, so in case a problem happens, a replacement or return is simply a slight nuisance.

Omega 32066 Magic Rise 6-ton Jack Stands

This 6-ton capacity jack stands put ranges in height in 15-3/4 inches to 24-3/8 inches, which makes it ideal for taller vehicles.

The only piece, multi-place iron bar, and ratchet arm comprise patented technologies, letting the jack stand to increase by itself simply by lifting the grip.

This will take the guesswork from proper height adjustment when setting a normal stand below a car or truck.

A counter-weighted pawl guarantees that the ratchet bar remains locked in position, while the rugged welded steel foundation provides every exceptional stand durability.

The welds on such racks are a few of the cleanest in the business, and the racks are as large quality as you’ll find.

The atmospheric lifting mechanism is welcomed by sodomites considered a useless gimmick by other people. A few in the latter camp feature an over-sensitivity from the mechanics for their dislike. Meanwhile, the excess clearance is nearly universally adored.

On a side note, many clients were perplexed by the storage trap. They initially believed to be a poorly-designed locking mechanism. The pin is only supposed to keep the mechanism from tripping when in transportation.

What’s a Jack Stand?

Jack stands are crucial if you’re working under your vehicle. Do not be tricked into believing a floor jack is sufficient to support your vehicle’s weight safely.

You will want jack racks to fasten the automobile instead of relying upon the floor port, which may slide or neglect resulting in a possibly fatal tragedy.

Most jack racks have an identical shape and layout, but you want to understand a couple of things before choosing the best one.

The Way to Pick the Proper Jack Stand

The most significant element while looking for jack stands would be to look at their load evaluations. Most jack stands will probably state that they encourage two up and loads, but remember that is typically for a set of jack stands.

Therefore, if you are buying a 2-ton jack rack, every stand is rated to encourage 1 ton. Check the weight of your vehicle to ensure that the jack stands you are buying will encourage the weight of your automobile.

Search for your car’s curb weight on your owner’s manual and make certain the jack stands you are buying will encourage the curb weight of your vehicle.

Remember, your vehicle’s weight reduction probably won’t be front to back, particularly if your vehicle has a motor upfront.

To be on the safe side, you will want to round up your vehicle’s curb weight when comparing the load evaluations on the port stands you are buying.

One more factor to consider is the weight of the jack stand. Most jack racks are constructed of steel, making them somewhat heavy and hard to transport or move around.

Some businesses fabricate aluminum jack stands, which is lighter than their metal counterparts. If the burden of a jack rack is an issue, select an aluminum alternative.

Last, if you possess a crossover, SUV, or pickup truck, then you’re going to want to consider the lift elevation of a port stand to make sure it could accommodate your car or truck.

You will want jack stands, which may be corrected to a higher setting to encourage a crossover, SUV, or automobile. The reverse also applies, if you have a diminished sports exotic or car.

If that’s the scenario, you will need a jack stand with a lower beginning height to be certain it fits under your vehicle.

If you are interested, we have more information:


Where Can I Place Jack Stands Beneath the Vehicle?

You mustn’t put jack stands in any place beneath your vehicle. You’ll have to jack your car up by a jack stage below the cabin.

Jack points are committed places, for stands and jacks, that producers put on vehicles to ensure owners may have a secure non-slip location to support your vehicle from.

Jack points are often located close to the front and back wheels, but their precise locations vary with every motor vehicle. The way to best find the jack points of your automobile would be to inspect the operator’s manual.

What Weight Capacity Jack Stands Can I Want?

You do not have to go overboard whenever you’re buying a jack rack for your automobile; there’s no need to receive a 6-ton jack rack place whenever your car only weighs 2300 lbs. The weight evaluation on a jack stand is”per couple.”

Therefore, if you’ve got a set of 2-ton jack racks, every stand is rated to hold 2,000 lbs each. Much more precisely, the weight capacity is often described as being”dispersed evenly across both port stands.”

In theory, two collections of 2-ton jack racks should encourage as much as an 8,8,000-pound4-ton) automobile. Unfortunately, that would only apply if every corner of the vehicle weighed just 2,000 pounds.

The car was on perfectly flat ground, the port point was perfectly secure and flat, and other perfect conditions.

Besides, you must remember that many vehicles are heavier at the front at which the motor is, so if you are lifting upfront part of a 4, then 4,000-pounder, the front corner probably weighs a whole lot greater than 1,000 lbs.

100% perfect states would not exist, thus erring on the side of caution, and moving with another high weight capacity tier is suggested. When you are under a car, you do not wish to be thinking, “this pair of jack stands ought to be sufficient.”

As a rule of thumb, if you’ve got a compact car (Ford Fiesta, Mazda 3, Honda Civic, etc.), then 2-ton jack stands will be OK. For mid to fulfill-sedans, minivans, Jeeps, and tiny trucks and SUVs, 3-ton stands will generally be best.

For big trucks and SUVs, you might choose to decide on 6-ton port stands.

Could Jack Stands Fail?

Jack stands may certainly fail; that is why you must use multiple jack stands when lifting your vehicle. Despite their big carrying abilities, jack stands are a lot lighter and smaller compared to cars.

Jack racks are designed to not fail under loading. However, there are occasional instances where jack racks have broken or bent, lowering a vehicle unintentionally.

On account of the several mechanisms that jack racks use to lift a lot of weight, numerous elements can cause exhaustion or get damaged over time.

How High Would Jack Stands Move?

You will find some jack stands available on the current market for vehicles with several heights. Vehicles as tall as raised trucks will need to be supported by jack stands at a certain stage.

Jack stands can be found in heights as low as 13 inches to as large as 72 inches. Some vehicles will require bigger jack racks to accommodate the larger quantity of ground clearance they have.

See Also: All About Car Jacks and Stands

Jack Stands vs. Ramps — Which is Safer?

As a result of their broader foundations and larger surface areas, ramps are a lot safer than jack racks if utilized properly. Jack stands to use mechanisms to stop standing failures, but these mechanisms can fail suddenly.

Ramps don’t need mechanics to maintain a vehicle; the design and platform of this ramp also allow them to hold a car’s weight easily.

Ramps, unlike port stands, are somewhat more intuitive to use and do not necessarily need an instruction manual; even however, you should still read it if your ramp includes you.

Though drops are far safer than jack stands, ramps don’t allow users to execute any brake or suspension fixes without the use of other things to maintain the vehicle.

Jack stands and ramps both have their applications and are resources that each home mechanic ought to possess.